Re: Ultrastor 14f and any network card

Posted by Stef. Zissopoulos on May 23, 1997 at 01:48:23:

In Reply to: Ultrastor 14f and any network card posted by J. Eric Josephson on May 22, 1997 at 16:51:16:

: Hello,

: I have a 14f. It works fin all by it self. If I
: add ANY network card it fails to ID anything, including
: it self.

: The SCSI card is on IRQ 14, I/O 330, RAM C800.

: My network cards have been on IRQ 10 or 5 and I/O
: 300 and 240. No luck.

: Everything works fine when I put my Adaptec
: 1522 back in :-((. ANy thoughts anyone?

USUALLY, THE MOTHERBOARD IN A 486 OR HIGHER COMPUTER HAS THE IRQS 14 AND 15 OCCUPIED BY THE IDE CONTROLLER (PRIMARY AND SECONDARY).

IT'S BETTER TO CHANGE THE IRQ OF ULTRA 14F, IN ORDER TO AVOID ANY CONFLICTS.

Re: Ultrastor 14f and any network card jim lowry 04:09:59 7/18/97 (3)
- Re: Ultrastor 14f and any network card David Chiang 00:41:37 8/09/97 (2)
  - Re: Ultrastor 14f and any network card Chi-Yao Huang 18:07:48 10/29/98 (1)
    - Re: Ultrastor 14f and any network card Michael Sim 16:57:00 4/28/99 (0)

Name:
E-Mail:
Subject:
Comments: : : : Hello, : : I have a 14f. It works fin all by it self. If I : : add ANY network card it fails to ID anything, including : : it self. : : The SCSI card is on IRQ 14, I/O 330, RAM C800. : : My network cards have been on IRQ 10 or 5 and I/O : : 300 and 240. No luck. : : Everything works fine when I put my Adaptec : : 1522 back in :-((. ANy thoughts anyone? : USUALLY, THE MOTHERBOARD IN A 486 OR HIGHER COMPUTER HAS THE IRQS 14 AND 15 OCCUPIED BY THE IDE CONTROLLER (PRIMARY AND SECONDARY). : IT'S BETTER TO CHANGE THE IRQ OF ULTRA 14F, IN ORDER TO AVOID ANY CONFLICTS.
Optional Link URL:
Link Title:
Optional Image URL:

[Cards | HowTos | Faqs/Links | FTP]
These pages use inline imagemaps - use an up-to-date browser to view correctly.