Re: Ultrastor and Maxtor 8760 error

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

Posted by Tim Spencer on June 08, 1997 at 09:56:10:

In Reply to: Ultrastor and Maxtor 8760 error posted by Phil Schilling on May 12, 1997 at 13:52:30:

: Any help to the following would be appreciated.

: Finds the drive at ID0, identifies the drive correctly and then give the following message.
: error00 02-03 31 00

: Thanks in advance for any help.

: Enter the bios utility and check the SCSI card diagnosis for any
possible conflicts. Also make sure in the advanced configuration
settings that the boot ID is set to 0. Also check the termination on
your HD and enable in bios. Also on some new Pentium motherboards the
bios has a section for PCI/PnP configuration check that the IRQ and DMA
for the SCSI card is set for ISA Legacy.

Good Luck
Tim Spencer

Follow Ups:

Post a Followup

Name:
E-Mail:
Subject:
Comments: : : Any help to the following would be appreciated. : : Finds the drive at ID0, identifies the drive correctly and then give the following message. : : error00 02-03 31 00 : : Thanks in advance for any help. : : Enter the bios utility and check the SCSI card diagnosis for any : possible conflicts. Also make sure in the advanced configuration : settings that the boot ID is set to 0. Also check the termination on : your HD and enable in bios. Also on some new Pentium motherboards the : bios has a section for PCI/PnP configuration check that the IRQ and DMA : for the SCSI card is set for ISA Legacy. : : Good Luck : Tim Spencer
Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

[Cards | HowTos | Faqs/Links | FTP]
These pages use inline imagemaps - use an up-to-date browser to view correctly.