Re: Ultrastor 14FB LED setup?

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

Posted by david chiang on August 09, 1997 at 00:38:56:

In Reply to: Ultrastor 14FB LED setup? posted by VinceGTwo on July 08, 1997 at 21:54:01:

well, if you haven't figured it out, your red (+) line from your LED should go to the pin in the corner of the card. the black (-) wire should be connected right next to it.
: I bought my UltraStor 14FB 2nd hand, so I didn't get the manual for it. I have figured out just about everything (Thank's to this web site!), except the setup for the LEDs.
: There are 4 pins on the card for the LED(s?).
: Can anyone tell me how they should be hooked up?

: Also, can anyone tell me if there is a way to get the CD driver to reconise a NEC 8x CD drive? The drive is from 1996, but the CD driver is from 1992 and I'm not sure if it's possible to get it working under DOS.
: Under Windows95, it works just fine.

Follow Ups:

Post a Followup

Name:
E-Mail:
Subject:
Comments: : well, if you haven't figured it out, your red (+) line from your LED should go to the pin in the corner of the card. the black (-) wire should be connected right next to it. : : I bought my UltraStor 14FB 2nd hand, so I didn't get the manual for it. I have figured out just about everything (Thank's to this web site!), except the setup for the LEDs. : : There are 4 pins on the card for the LED(s?). : : Can anyone tell me how they should be hooked up? : : Also, can anyone tell me if there is a way to get the CD driver to reconise a NEC 8x CD drive? The drive is from 1996, but the CD driver is from 1992 and I'm not sure if it's possible to get it working under DOS. : : Under Windows95, it works just fine.
Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

[Cards | HowTos | Faqs/Links | FTP]
These pages use inline imagemaps - use an up-to-date browser to view correctly.