Re: LOWLEVEL FORMAT

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

Posted by Marco Oliveira on January 31, 1999 at 12:24:17:

In Reply to: Re: LOWLEVEL FORMAT posted by urudorachan on August 04, 1998 at 01:30:53:

: : Hello,

: : I need a lowlever format tool. Please send me via
: : EMAIL this tool if you can. If it cost something
: : please let me know first that I can deside whether
: : I want to spend the money or not.

: : With best regards

: : Nicolai

: :
: : : : Hi All,

: : : : Can anyone give me the correct debug lowlevel format command and parametersor is there a generic lowlevel format utility I can use?
: : : : Any help would be appreciated! Thanks

: : : You need to boot off a floppy with debug.exe on it. Then:

: : : Q4) How do I access the BIOS on an UltraStor card?

: : : A4) To invoke the on-board BIOS utility, after a full system bootup to DOS
: : : operating system, use the DOS "DEBUG" program to access the BIOS utility:

: : : a. Load the DEBUG program by typing

: : : DEBUG after the DOS prompt ( ">" sign )

: : : b. Once in the DEBUG program, following the prompt ( "-" sign ), type

: : : g=c800:5 (or whatever BIOS address the board is jumpered to.)

Follow Ups:

Post a Followup

Name:
E-Mail:
Subject:
Comments: : : : Hello, : : : I need a lowlever format tool. Please send me via : : : EMAIL this tool if you can. If it cost something : : : please let me know first that I can deside whether : : : I want to spend the money or not. : : : With best regards : : : Nicolai : : : : : : : : Hi All, : : : : : Can anyone give me the correct debug lowlevel format command and parametersor is there a generic lowlevel format utility I can use? : : : : : Any help would be appreciated! Thanks : : : : You need to boot off a floppy with debug.exe on it. Then: : : : : Q4) How do I access the BIOS on an UltraStor card? : : : : A4) To invoke the on-board BIOS utility, after a full system bootup to DOS : : : : operating system, use the DOS "DEBUG" program to access the BIOS utility: : : : : a. Load the DEBUG program by typing : : : : DEBUG after the DOS prompt ( ">" sign ) : : : : b. Once in the DEBUG program, following the prompt ( "-" sign ), type : : : : g=c800:5 (or whatever BIOS address the board is jumpered to.)
Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ UltraStor Unauthorized WWWBoard! ] [ FAQ ]

[Cards | HowTos | Faqs/Links | FTP]
These pages use inline imagemaps - use an up-to-date browser to view correctly.