Re: Ultrastor 12F-24 & Seagate ST4767E

Posted by Warren Fine on August 22, 1997 at 09:21:32:

In Reply to: Re: Ultrastor 12F-24 & Seagate ST4767E posted by Herbert Fenz on June 17, 1997 at 07:08:33:

I need a new Eprom for my drives.
If you can help Please E-mail me.
with cost and delivery information.

Thanks
Warren Fine

: : : Hello!

: : : Please can you tell me, how can i get a BIOS version, which
: : : works with my ULTRASTOR 12F-24 ESDI-Controller an my SEAGATE
: : : ST4767E harddrive. I have BIOS-Version -008 and -009, but with
: : : both i get an error reading PList for all heads.
: : : I can LLFīd the harddrive but fdisk always not stored.
: : : Iīve tried all setup variations but nothing works.
: : : If you can send me binary files of needed BIOS, i can make
: : : new EPROMS by myself (i own an EPROMER)

: : Hi, I don't have much info on this one... I have
: : attached the link to the 12f directory of the ftp
: : site. The files 12f-bin.zip and 12f009.zip should
: : contain the latest eprom files. Be sure to read any
: : readme files in that archive.

: : Hope that helps, Ben

: Hello, i have used the file 12f-bin.zip to burn a new BIOS (it contains
: Version 012 for firmware and 010 for BIOS) but i canīt get any difference.
: When i use fdisk 1st time i get 642MB, next time fdisk display 643MB
: and another time i get 478MB - it seems that the controller cannot
: read correct disk-information, but with the LLFīd Procedure i get always
: the correct physical disc-parameters.
: the parameters of my drive are:
: SEAGATE ST4767E 1398Cyl, 15Hds, 65SPT with 4800rpm
: my non-ULTRASTOR ESDI-Controller works with this drive, but i like to use
: the 12F-24 or to forget this drive...+

Follow Ups:

Post a Followup